PhD opportunities
Centre for Energy and Processes
Chemical engineering
- Development of both specific equipment and predictive model for the thermodynamic study of sulfides (REF. 2012/T01)
- Dynamic simulation of the operation for methane storage system of renewable electricity based on reversible high temperature electrolysis (REF. 2012/P03)
Energy conversion
- Corrosion resistive metal oxides based electrodes for the oxygen reduction in low temperature proton exchange membrane fuel cells (PEMFC) (REF. 2012/S05)
- Assessing the spectral distribution of the solar radiation by numerical models and satellite images. Application cases: photovoltaic, UV, photosynthesis, daylight (REF. 2012/S04)
- Analysis of flexibilities and optimization of the management of a Positive Energy building Island (REF. 2012/P13)
- Predictive management tool development for heating and cooling thermodynamic systems (REF. 2012/P09)
- Multi-physical modeling of glassed openings (REF. 2012/P04)
- Energy performance guarantee in new buildings (REF. 2012/P11)
- Study of a plasma electro-burner for the energy valorization of poor LHV renewable fuels (REF. 2012/S03)
- Modelling the distribution of radiances in the sky vault under clear-sky conditions for an accurate assessment of the beam and circumsolar radiation (REF. 2012/S06)
- Identification of Building thermal models using inverse methods (REF. 2012/P01 - 2011/P02)
- CO2 retroconversion by high pressure electrical discharges for the synthesis of liquid or gaseous hydrocarbons (REF. 2012/S01 - 2011/S01)
- Control and design optimisation of géothermal systems providing 3 thermal needs in residential buildings (REF. 2012/P15)
- High-temperature industrial heat pumps recovering heat on medium temperature saturated air or vapor (REF. 2012/P02 - 2011/P10)
- Elaboration and evaluation of new highly corrosion resistant catalyst carbon aerogel like supports ex biomass for PEMFC (REF. 2012/S02 - 2011/S06)
Centre for material forming
Computational mechanics
- Numerical Model for Microstructure Development during Solidification using a Level-Set Framework
- Modélisation des procédés de magnétoformage.
Materials science and engineering - Sophia Antipolis
- Analysis and modelling of the fracture process of carbonitrided car seats flange
- Multiscale Modeling of Solidification Structures and Interaction with Fluid Mechanics
- Control of a Ni base superalloy microstructure during a forming sequence, and link with the final properties.
- Caractérisation des performances de semelles caoutchoucs antidérapantes ;
- Optimisation des procédés de soudage FSW (Friction Stir Welding) appliqués aux alliages d’aluminium.
- Modélisation des écoulements de polymères fondus dans les co-malaxeurs de type Buss.
- Structure and properties of injected natural fibre reinforced composites.
- Contre l’adhésion de la résine au moule lors de quelques procédés de mise en forme .
Centre of materials
Materials science and engineering - Evry
- Influence of microstructure on mechanical properties of 2.25Cr-1Mo bainitic steels
- Projection dynamique par gaz froid (« cold spray ») pour la reparation de pièces aéronautiques
- Hybrid Structure material modelling for Crash applications
- Effet de fortes teneurs en hydrogène sur la microstructure et le comportement mécanique de gaines en alliages de zirconium du combustible des réacteurs à eau pressurisée oxydées à haute température
- Multiaxial fatigue of a steel for pipelines
- Contribution to the development of metal-supported high temperature fuel cells
- Deformation and fatigue of macromolecular networks
- Stress corrosion cracking of weld metals : influence of microstructural parameters
- Contribution à la conception, au dimensionnement et à la réalisation de volants d'inertie en composite
- Modélisation de procédés de fabrication directe de pièces aéronautique et spatiale en TA6V par projection et fusion sélective d’un lit de poudre par laser : Approche thermique, métallurgique et mécanique
- Modélisation du comportement mécanique en déformation d'un tube d'arme au passage d'un projectile et d'une approche de ses conséquences en terme de durabilité. Etude expérimentale et modélisation
- Optimisation of the critical rotating rate of turbine discs
- Rupture des gaines combustibles en situation accidentelle de type RIA : Etude expérimentale et modélisation
- Characterisation and modelling high-temperature damage mechanisms of oxide dispersion strengthened (ODS) ferritic steels
Geosciences
Geology for the engineer
Geostatistics
- Modèles de fonctions aléatoires sur réseaux
- Geostatistical models for the prediction of threshold exceeding and recoverable resources
- Improved inference of truncated gaussian geostatistical models
Quantitative hydrology and hydrogeology
- Treatment of radioactive liquid effluents by ion exchange materials columns: experience and simulation
- Alteration of the spent-fuel matrix U(,Pu)O2 under radwaste disposal conditions
- The role of spatial variability in the vicinity of a CO2 injection well: implication for the storage integrity.
- Multiscale modelling of stream-aquifer interfaces in the Seine hydrosystem
Sedimentary basins dynamics and resources
- Characterization of modern fine-grained deposits in France in order to investigate their potential as building material
- Combining reflected and transmitted waves for migration velocity analysis
- Characterization of sediment heterogeneities in an alluvial plain: The example of the upper Seine river (France) evolution since the late glacial maximum.
- Fracturation des sédiments de couverture: de la caractérisation à la modélisation. Évolution du comportement à la rupture au cours de la diagenèse
- Stochastic methods for geophysics
Subsoil exploitation techniques and economics
- Modeling of percussive drilling process under high confining. Application to deep hard rock drilling
- Parameters adjustment in a Multi-scaling Landscape Evolution Model
Mathematics and Systems
Real-time computer science, robotics, control - Paris
MINES ParisTech
225 years of history for the Graduate School.
1 440 students.
15 research centers, 260 talented professors-researchers, 1st school for partnership research, a unique link with companies.
Values built over the years, which we are proud to display, to maintain, to share.
Welcome to MINES ParisTech!
Share this page :
| ©2009 Mines ParisTech |